Con i nostri cookie, vorremmo offrirti la migliore esperienza di shopping possibile, con tutto ciò che ne consegue. Questo include, ad esempio, offerte adatte, annunci personalizzati e il salvataggio delle preferenze. Se per te va bene, acconsenti semplicemente all'uso dei cookie per preferenze, statistiche e marketing cliccando su 'Va bene!' (show all). Il consenso può essere revocato in qualsiasi momento tramite le impostazioni dei cookie (qui)
Direzionalità del Tweeter molto bassa per una posizione d'ascolto flessibile
Cassa chiusa con 2 diaframmi passivi per un facile posizionamento in prossimità di una parete
Design a 2,5 vie per un controllo ottimale dei bassi e dei medi inferiori
Numerose impostazioni per un'integrazione ottimale
Membrana Flax Sandwich per una risposta dei bassi controllata e articolata oltre ad una riproduzione naturale e dettagliata dei medi inferiori e superiori
Dati tecnici:
Risposta in frequenza (+/- 3 dB): 40 - 35 Hz
Livello massimo di pressione sonora (musica): 110,5 dB SPL (picco a 1 m)
Ingressi elettronici/tipo di impedenza: XLR simmetrici, 10 kOhm
Connessioni RCA: asimmetriche, 10 kOhm con compensazione della sensibilità di ingresso
Amplificatore di potenza per la gamma di medi e bassi: 2 x 80 W, classe AB
Amplificatore di potenza per la gamma degli alti: 50 W, classe AB
Modalità Standby automatica
Spegnimento: dopo circa 30 minuti dall'ultimo ingresso del segnale
Interruzione dalla modalità standby: applicando un segnale >3 mV
Assorbimento di corrente: da 220 a 240 V (fusibile: T2AL/250 V) o da 100 a 120 V (fusibile T3.15AL/250 V)
Connessioni: presa IEC e cavo di rete separato
Filtro passa-alto: variabile, gamma 45/60/90 Hz
Livello dei bassi (0 - 250 Hz): variabile, +/-6 dB
Medio/basso (160 Hz, Q=1): variabile, +/-3 dB
Livello degli acuti (4,5 - 35 kHz): variabile, +/-3 dB
Accensione e spegnimento: Interruttore On/Off sul retro
Assorbimento di energia in modalità standby: < 0,5 W
LED per accensione/spegnimento e standby
Woofer: 2 x 5" (13 cm) Flax Cone
Tweeter: 1" (25 mm) in alluminio/magnesio con profilo M
Struttura del cabinet: MDF da 15 mm
Finitura: vinile, impiallacciatura in noce, vernice nera
Devi effettuare il login per poter lasciare una recensione.
IMPORTANTE: Per evitare di inserire informazioni per sentito dire, non complete o sbagliate, permettiamo di dare un giudizio delle attrezzature solo ai nostri clienti che hanno comprato la merce direttamente da noi.
Dopo il Login trovi nella tua area cliente troverete sotto la sezione "Giudica i prodotti" tutti gli articoli ai quali potrete dare un giudizio
Ho preso le Twin Shape per utilizzarle nel mio studio con regia di 20 metri quadri. Dopo il rodaggio, ben spiegato all'interno della confezione le ho provate a volumi operativi. Esterrefatto dalla profondità delle basse frequenze e dalla versatilità di queste stupende casse. Quello che consiglio è una buona gestione delle basse frequenze con bass trap e di tagliarle sempre a 45hz.
Caratteristiche
Qualità
Suono
2
0
Segnala un abuso
Segnala un abuso
A
Focal Shape Twin
Anonimo 23.03.2023
Monitor strepitosi. Suono avvolgente e dettagliato. Grazie a questi monitor è possibile modificare i suoni con un'altissima precisione.
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
H
Amazing Monitors
HappyCustom 31.01.2020
I've had the Shape Twins for a month now, can finally give a fair review.
The build quality is excellent and the monitors look fantastic. There is a real attention to detail in the monitor design, as you would expect from Focal.
Sonically the monitors are fantastic, however, it is not a flat monitor - It has a specific character. The low-mids are forward and the high-mids to top end is very sweet if not slightly under-pronounced. Making the monitor very soft on the ear and you can work for long hours without fatigue. The stereo imaging is really amazing and you will be amazed when re-listening to your music library at how well you are able to pick out details in the music.
The passive radiator is my favorite thing about the monitor, producing well controlled solid low end without any artifacts and allowing you freedom to place the monitors closer to the back wall.
The only thing that could be improved is the low and high frequency control knobs. At first I though it would not be a problem but the fact it is not indented makes it hard to set both exactly the same and it can accidentally be adjusted when you switch on the monitor.
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
D
Taken me to next level
Duke888 02.06.2018
You know when they say the most important part of your setup is the monitors? Well I understand it now.
Im coming from cheaper monitors. Since swapping to these the difference in my mix quality is night and day. They give great feedback. I find myself needing to reference on other systems a lot less now. If I mix on these, then I know it will translate well. It's saved me so much time in my productions.
The speakers are sensitive, show up all transients and details. If your interface is low quality these will really show it. So think about what you are pairing these with to get the best out of them and use good quality XLR cables.
I didn't want to drop the star on quality. The speakers are very handsome and functionally nothing wrong with them. Some people complain about the auto power feature but I had no issues, its very convenient.
But there are just a couple of niggles.
1. The EQ filter knobs have no click at all, not even for 0. It forces you to go around the back of the speaker to line up properly. Even a small adjustment does alter the sound so it would be nice to have a few notches.
2. The screw in feet are a bit of a fiddle. They are just screws with rubber on the end and the head is not fixed. The speakers are tall and heavy! So adjusting the feet is a bit of a pain and l I had one of them fall over.
Really I would say 4.5 for quality and I wouldn't hesitate to buy them again.